sublime text2 配置:settings defautl 和 settings user(中文注释),sublime text2,各种 E 文,弄清楚配置文件,势在必行。问度娘找了些资料,把配置文件的每条配置信息都加上了中文注释(settings user 中文注释 ),现在贴出来和大家共享,里面有解释不清楚的也欢迎大家伙来互相讨论。注:settings user 里的配置会覆盖 settings default 里相同的配置。

// While you can edit this file, it's best to put your changes in
// "User/Preferences.sublime-settings", which overrides the settings in here.
//
// Settings may also be placed in file type specific options files, for
// example, in Packages/Python/Python.sublime-settings for python files.
{
// Sets the colors used within the text area
// 主题文件的路径
"color_scheme": "Packages/Color Scheme - Default/Monokai.tmTheme",
// Note that the font_face and font_size are overriden in the platform
// specific settings file, for example, "Preferences (Linux).sublime-settings".
// Because of this, setting them here will have no effect: you must set them
// in your User File Preferences.
// 设置字体和大小,必须在 Settings-User 里重写,这里设置没有任何效果
"font_face": "Consolas",
"font_size": 12,

// Valid options are "no_bold", "no_italic", "no_antialias", "gray_antialias",
// "subpixel_antialias" and "no_round" (OS X only)
// 字体选项:no_bold 不显示粗体字,no_italic 不显示斜体字,no_antialias 和 no_antialias 关闭反锯齿
// subpixel_antialias 和 no_round 是 OS X 系统独有的
"font_options": [],

// Characters that are considered to separate words
// 在文字上双击会全选当前的内容,如果里面出现以下字符,就会被截断
"word_separators”: “./()\”‘-:,.;~!@#$%^&*|+=[]{}`~?",

// Set to false to prevent line numbers being drawn in the gutter
// 是否显示行号
"line_numbers": true,

// Set to false to hide the gutter altogether
// 是否显示行号边栏
"gutter": true,

// Spacing between the gutter and the text
// 行号边栏和文字的间距
"margin": 4,

// Fold buttons are the triangles shown in the gutter to fold regions of text
// 是否显示代码折叠按钮
"fold_buttons": true,

// Hides the fold buttons unless the mouse is over the gutter
// 不管鼠标在不在行号边栏,代码折叠按钮一直显示
"fade_fold_buttons": true,

// Columns in which to display vertical rulers
// 列显示垂直标尺,在中括号里填入数字,宽度按字符计算
"rulers": [],

// Set to true to turn spell checking on by default
// 是否打开拼写检查
"spell_check": false,

// The number of spaces a tab is considered equal to
// Tab 键制表符宽度
"tab_size": 4,

// Set to true to insert spaces when tab is pressed
// 设为 true 时,缩进和遇到 Tab 键时使用空格替代
"translate_tabs_to_spaces": false,

// If translate_tabs_to_spaces is true, use_tab_stops will make tab and
// backspace insert/delete up to the next tabstop
// translate_tabs_to_spaces 设置为 true,Tab 和 Backspace 的删除 / 插入作用于制表符宽度
// 否则作用于单个空格
"use_tab_stops": true,

// Set to false to disable detection of tabs vs. spaces on load
// false 时禁止在载入的时候检测制表符和空格
"detect_indentation": true,

// Calculates indentation automatically when pressing enter
// 按回车时,自动与制表位对齐
"auto_indent": true,

// Makes auto indent a little smarter, e.g., by indenting the next line
// after an if statement in C. Requires auto_indent to be enabled.
// 针对 C 语言的
"smart_indent": false,

// Adds whitespace up to the first open bracket when indenting. Requires
// auto_indent to be enabled.
// 需要启用 auto_indent,第一次打开括号缩进时插入空格?(没测试出来效果...)
"indent_to_bracket": true,

// Trims white space added by auto_indent when moving the caret off the
// line.
// 显示对齐的白线是否根据回车、tab 等操作自动填补
"trim_automatic_white_space": true,

// Disables horizontal scrolling if enabled.
// May be set to true, false, or "auto", where it will be disabled for
// source code, and otherwise enabled.
// 是否自动换行,如果选 auto,需要加双引号
"word_wrap": false,

// Set to a value other than 0 to force wrapping at that column rather than the
// window width
// 设置窗口内文字区域的宽度
"wrap_width": 0,

// Set to false to prevent word wrapped lines from being indented to the same
// level
// 防止被缩进到同一级的字换行
"indent_subsequent_lines": true,

// Draws text centered in the window rather than left aligned
// 如果没有定义过,则文件居中显示(比如新建的文件)
"draw_centered": false,

// Controls auto pairing of quotes, brackets etc
// 自动匹配引号,括号等
"auto_match_enabled": true,

// Word list to use for spell checking
// 拼写检查的单词列表路径
"dictionary": "Packages/Language - English/en_US.dic",

// Set to true to draw a border around the visible rectangle on the minimap.
// The color of the border will be determined by the "minimapBorder" key in
// the color scheme
// 代码地图的可视区域部分是否加上边框,边框的颜色可在配色方案上加入 minimapBorder 键
"draw_minimap_border": false,

// If enabled, will highlight any line with a caret
// 突出显示当前光标所在的行
"highlight_line": false,

// Valid values are "smooth", "phase", "blink", "wide" and "solid".
// 设置光标闪动方式
"caret_style": "smooth",

// Set to false to disable underlining the brackets surrounding the caret
// 是否特殊显示当前光标所在的括号、代码头尾闭合标记
"match_brackets": true,

// Set to false if you'd rather only highlight the brackets when the caret is
// next to one
// 设为 false 时,只有光标在括号或头尾闭合标记的两端时,match_brackets 才生效
"match_brackets_content": true,

// Set to false to not highlight square brackets. This only takes effect if
// match_brackets is true
// 是否突出显示圆括号,match_brackets 为 true 生效
"match_brackets_square": false,

// Set to false to not highlight curly brackets. This only takes effect if
// match_brackets is true
// 是否突出显示大括号,match_brackets 为 true 生效
"match_brackets_braces": false,

// Set to false to not highlight angle brackets. This only takes effect if
// match_brackets is true
// 是否突出显示尖括号,match_brackets 为 true 生效
"match_brackets_angle": false,

// Enable visualization of the matching tag in HTML and XML
// html 和 xml 下突出显示光标所在标签的两端,影响 HTML、XML、CSS 等
"match_tags": true,

// Highlights other occurrences of the currently selected text
// 全文突出显示和当前选中字符相同的字符
"match_selection": true,

// Additional spacing at the top of each line, in pixels
// 设置每一行到顶部,以像素为单位的间距,效果相当于行距
"line_padding_top": 1,

// Additional spacing at the bottom of each line, in pixels
// 设置每一行到底部,以像素为单位的间距,效果相当于行距
"line_padding_bottom": 1,

// Set to false to disable scrolling past the end of the buffer.
// On OS X, this value is overridden in the platform specific settings, so
// you'll need to place this line in your user settings to override it.
// 设置为 false 时,滚动到文本的最下方时,没有缓冲区
"scroll_past_end": true,

// This controls what happens when pressing up or down when on the first
// or last line.
// On OS X, this value is overridden in the platform specific settings, so
// you'll need to place this line in your user settings to override it.
// 设置成 true,当光标已经在第一行时,再 Up 则到行首,如果光标已经在最后一行,再 Down 则跳到行尾
"move_to_limit_on_up_down": false,

// Set to "none" to turn off drawing white space, "selection" to draw only the
// white space within the selection, and "all" to draw all white space
// 按 space 或 tab 时,实际会产生白色的点(一个空格一个点)或白色的横线(tab_size 设置的制表符的宽度),选中状态下才能看到
// 设置为 none 时,什么情况下都不显示这些点和线
// 设置为 selection 时,只显示选中状态下的点和线
// 设置为 all 时,则一直显示
"draw_white_space": "selection",

// Set to false to turn off the indentation guides.
// The color and width of the indent guides may be customized by editing
// the corresponding .tmTheme file, and specifying the colors "guide",
// "activeGuide" and "stackGuide"
// 制表位的对齐白线是否显示,颜色可在主题文件里设置(guide,activeGuide,stackGuide)
"draw_indent_guides": true,

// Controls how the indent guides are drawn, valid options are
// "draw_normal" and "draw_active". draw_active will draw the indent
// guides containing the caret in a different color.
// 制表位的对齐白线,draw_normal 为一直显示,draw_active 为只显示当前光标所在的代码控制域
"indent_guide_options": ["draw_normal"],

// Set to true to removing trailing white space on save
// 为 true 时,保存文件时会删除每行结束后多余的空格
"trim_trailing_white_space_on_save": false,

// Set to true to ensure the last line of the file ends in a newline
// character when saving
// 为 true 时,保存文件时光标会在文件的最后向下换一行
"ensure_newline_at_eof_on_save": false,

// Set to true to automatically save files when switching to a different file
// or application
// 切换到其它文件标签或点击其它非本软件区域,文件自动保存
"save_on_focus_lost": false,

// The encoding to use when the encoding can't be determined automatically.
// ASCII, UTF-8 and UTF-16 encodings will be automatically detected.
// 编码时不能自动检测编码时,将自动检测 ASCII, UTF-8 和 UTF-16
"fallback_encoding": "Western (Windows 1252)",

// Encoding used when saving new files, and files opened with an undefined
// encoding (e.g., plain ascii files). If a file is opened with a specific
// encoding (either detected or given explicitly), this setting will be
// ignored, and the file will be saved with the encoding it was opened
// with.
// 默认编码格式
"default_encoding": "UTF-8",

// Files containing null bytes are opened as hexadecimal by default
// 包含空字节的文件被打开默认为十六进制
"enable_hexadecimal_encoding": true,

// Determines what character(s) are used to terminate each line in new files.
// Valid values are 'system' (whatever the OS uses), 'windows' (CRLF) and
// 'unix' (LF only).
// 每一行结束的时候用什么字符做终止符
"default_line_ending": "system",

// When enabled, pressing tab will insert the best matching completion.
// When disabled, tab will only trigger snippets or insert a tab.
// Shift+tab can be used to insert an explicit tab when tab_completion is
// enabled.
// 设置为 enabled 时,在一个字符串间按 Tab 将插入一个制表符
// 设置为 true 时,按 Tab 会根据前后环境进行代码自动匹配填补
"tab_completion": true,

// Enable auto complete to be triggered automatically when typing.
// 代码提示
"auto_complete": true,

// The maximum file size where auto complete will be automatically triggered.
// 代码提示的大小限制
"auto_complete_size_limit": 4194304,

// The delay, in ms, before the auto complete window is shown after typing
// 代码提示延迟显示
"auto_complete_delay": 50,

// Controls what scopes auto complete will be triggered in
// 代码提示的控制范围
"auto_complete_selector": "source - comment",

// Additional situations to trigger auto complete
// 触发代码提示的其他情况
"auto_complete_triggers": [{"selector": "text.html", "characters": "<"} 0=""1="" ],=""by="" default,=""auto="" complete=""will="" commit=""the="" current=""completion="" on=""enter.="" this=""setting="" can=""be="" used=""to="" make=""it="" tab=""instead.="" completing=""is="" generally=""a="" superior=""option,="" as=""removes="" ambiguity=""between="" committing=""and="" inserting=""newline.="" 设为 false 时,选择提示的代码按回车或点击可以输出出来,但选择 true 时不会输出而是直接换行 ="""auto_complete_commit_on_tab":=""false,="" controls if=""shown="" when=""snippet="" fields=""are="" active.=""only="" relevant=""auto_complete_commit_on_tab="" true.=""auto_complete_commit_on_tab 必须为 true,控制代码提示的活跃度(没明白...)="" "auto_complete_with_fields":=""shift+tab="" unindent=""selection="" spans=""multiple lines.="" pressing=""at="" other=""times,="" it'll="" insert=""character="" -=""allows="" tabs=""inserted="" tab_completion=""enabled.="" set=""true="" always=""unindent,="" instead=""of="" tabs.=""设置为 false,使用 shift="" +=""tab 总是插入制表符 ="" "shift_tab_unindent":=""true,="" selected text=""copied="" into=""find="" panel=""it's=""shown.="" os=""x,="" value=""overridden="" in=""platform="" specific=""settings,="" so=""you'll=""need="" place=""line="" your=""user="" settings=""override="" it.=""选中的文本按 ctrl="" f 时,自动复制到查找面板的文本框里 ="""find_selected_text":=""interface="" theme=""look="" sublime=""text's=""ui="" (buttons,=""tabs,="" scroll=""bars,="" etc)=""datapackagestheme="" defaultdefault.sublime-theme 控制软件的主题 ="""theme":="""default.sublime-theme",=""disable="" smooth=""scrolling.="" slower,=""or="" larger=""than="" faster=""滚动的速度 ="" "scroll_speed":=""1.0,="" side=""bar="" animation=""expanding="" collapsing=""folders="" 左边边栏文件夹动画 ="""tree_animation_enabled":=""标签页的关闭按钮 ="" "show_tab_close_buttons":=""x="" 10.7=""only:="" lion=""style="" full=""screen="" support.=""must="" restarted=""for="" take=""effect.="" 针对 os="""use_simple_full_screen":=""valid="" values="""system",="""enabled"="""disabled"=""水平垂直滚动条:system 和 disabled 为默认显示方式,enabled 为自动隐藏显示 ="" "overlay_scroll_bars":=""application="" behavior=""exiting="" with=""hot_exit="" enabled=""cause="" close=""immediately="" without=""prompting.="" unsaved=""modifications="" open files=""preserved="" restored=""next="" starting.=""closing="" window=""an="" associated=""project="" also=""prompting,="" preserving=""changes="" workspace=""file="" alongside=""project.="" 热推出功能!退出时不会提示是否保存文件,而是直接退出 =""下次打开软件时,文件保持退出前的状态,没来得及保存的内容都在,但并没有真实的写在原文件里 ="" "hot_exit":=""remember_open_files="" makes=""start="" up=""last="" files.=""changing="" false=""have="" no=""effect="" 软件使用最后的设定打开文件,hot_exit 为 true 时没有效果 ="""remember_open_files":=""opened="" from=""finder,="" dragging=""onto="" dock=""icon,="" new=""created="" not.="""open_files_in_new_window":=""windows="" soon=""closed,="" unless=""there's=""folder="" within=""window.="" here=""won't=""modify="" behavior.="""close_windows_when_empty":=""哪些文件会被显示到边栏上 ="" folder_exclude_patterns=""file_exclude_patterns="" control=""which="" listed=""bar.="" these=""per-="" basis.="""folder_exclude_patterns":=""[".svn",="" ".git",=""".hg",="""cvs"],="""file_exclude_patterns":=""["*.pyc",="" "*.pyo",="""*.exe",="""*.dll",="""*.obj","*.o",="""*.a",="""*.lib",="""*.so",="""*.dylib",="""*.ncb",="""*.sdf",="""*.suo",="""*.pdb",="""*.idb",=""".ds_store",="""*.class",="""*.psd",="""*.db"],=""still="" show=""bar,="" but=""included="" goto=""anything="" "binary_file_patterns":=""["*.jpg",="" "*.jpeg",="""*.png",="""*.gif",="""*.ttf",="""*.tga",="""*.dds",="""*.ico",="""*.eot",="""*.pdf",="""*.swf",="""*.jar",="""*.zip"],=""list="" any=""packages="" ignore=""here.="" removing=""entries="" list,=""restart="" may=""required package="" contains=""plugins.="" 删除你想要忽略的插件,需要重启 ="""ignored_packages":=""["vintage"]="" }<=""pre="">

本文地址 https://shaoshilei.com/2014-03/sublime-text2-configuration-settings-defautl-and-settings-user-chinese-annotation.html